Hewlett Packard (HP) HP Officejet 720 All-in-One, Version 1.0 Printer Driver

Hewlett Packard (HP) HP Officejet 720 All-in-One, Version 1.0 Driver. Note: For Windows 95/98/Me, this is NOT a new driver. It is the same driver that was delivered in the box with your product. You need only download this driver if you were directed by your local Call Center to do so, or if the software was missing or damaged in the box when you received your product.

ECP Mode Must be ON! (Extended Capabilities Port)

If you plan to connect your HP OfficeJet or HP Printer/Scanner/Copier to your PC via the PC's parallel port, your computer's parallel port must be set to ECP mode to operate properly under Windows 2000. ECP mode allows greater I/O (communications) capabilities through your parallel port and is enabled via the computer's BIOS. Restart your PC, and in most cases, you will be prompted to hit F1, F2, or DEL to Enter your computer's BIOS or "Setup" program. (Check your PC's documentation or vendor's web site for more info).

Once you have entered SETUP, locate the configuration section for your PARALLEL PORT and modify it to read ECP. If ECP is not a choice, use a variation of ECP, such as ECP & EPP, or ECP DMA1. Save changes and reboot. Windows 2000 should recognize this and list the Item ECP Printer port in the Device Manager of the Control Panel/System applet under "Ports". If your PC does not support ECP, it will likely fall below the minimum system requirements for Windows 2000. It is also recommended that you install Microsoft Service Pack 1 for Windows 2000. Please visit Microsoft's web site, www.windowsupdate for more information.

Download and install instructions:

Single File Installation Instructions for the Windows 95/98 Driver:

Click the hypertext link, oj700en95.EXE. A Save As dialog box will appear.

Create a new folder on your desktop (OfficeJet700 is recommended).

Save the downloaded file in the folder you created.

Exit all applications.

Find the newly downloaded file in the folder you created and double-click it to launch the OfficeJet 700 installer.

Follow the on-screen instructions.

Multiple File Installation Instructions for the Windows 95/98 Driver:

Create a new folder on the desktop (Officejet 700 is recommended).

Download the files to the newly created folder.

Make sure to download all parts!

Exit all applications.

Run the first executable file of the series. For example, to install the English drivers, first run the file oj700en95001.EXE

Follow the on-screen instructions.